| 1. Remove an intermediate shaft. |
| 2. Remove a driving chain from an asterisk of a bent shaft. |
| 3. Using a stripper, remove an asterisk from a bent shaft to release space for removal of an uspokoitel of a chain. |
| 4. Remove the lower uspokoitel of a chain from clamps. |
| 5. Check a condition of the lower uspokoitel of a chain and, if necessary, replace it. |
| 6. Establish the lower clamp of a chain in clamps. |
| 7. Combine a groove in an asterisk of a bent shaft with a segment spline and, using a metal tubular mandrel and the hammer, establish an asterisk on the forward end of a bent shaft. |
| 8. Install the coupling of the drive of the oil pump. |
| 9. Dress a driving chain on an asterisk of a bent shaft, having combined at the same time the tags made at removal of an asterisk. |
| 10. Establish an intermediate shaft. |