23.14.2. Installation
The top lever defining disorder
| PERFORMANCE ORDER |
| 1. If necessary press the adjusting plug in the nave fastener. |
| 2. Install the lever into place, insert hinged bolts and screw on them new nuts, without tightening them it is final. |
| 3. Establish a back wheel, then lower the car on the earth and tighten bolts of fastening of a wheel the required moment. |
| 4. Shake the car in order that elements of fastening of the lever were established on the places, then put both clamps of hinged bolts the required moment. |
|
Top jet lever
| PERFORMANCE ORDER |
| 1. Install the lever into place, insert hinged bolts and screw on them new nuts, without tightening them it is final. |
| 2. Establish a back wheel, then lower the car on the earth and tighten bolts of fastening of a wheel the required moment. |
| 3. Shake the car in order that elements of fastening of the lever were established on the places, then put both clamps of hinged bolts the required moment. |
|
Lower lever of compensation of axial pressure
| PERFORMANCE ORDER |
| 1. If necessary press the adjusting plug in the nave fastener. |
| 2. Install the lever into place, insert hinged bolts and screw on them new nuts, without tightening them it is final. |
| 3. Establish a back wheel, then lower the car on the earth and tighten bolts of fastening of a wheel the required moment. |
| 4. Shake the car in order that elements of fastening of the lever were established on the places, then put both clamps of hinged bolts the required moment. |
|
The lower directing lever
| PERFORMANCE ORDER |
| 1. Install the lever into place, then insert an internal hinged bolt and an eccentric washer and screw a new nut on a bolt, but do not tighten it finally. |
| 2. Install a pin of the spherical hinge on the fastener of a nave and fix by a new nut, having tightened it the required moment. |
| 3. Establish a back wheel, then lower the car on the earth and tighten fastening bolts the required moment. |
4. Shake the car for the correct installation of the lever, check that tags on the lower frame, a hinged bolt and an eccentric washer are combined, then tighten a nut of a hinged bolt the required moment.
Prevention
At the first opportunity check a convergence of back wheels.
|
|