| 1. Remove the transmission. |
| 2. Remove the lower mudguard of the engine. |
| 3. Merge engine oil from the engine. |
| 4. Merge cooling liquid from the cooling system. |
| 5. Remove a radiator and the fan of a radiator. |
| 6. For prevention close the condenser from damage of the condenser of the air conditioning system a leaf of a cardboard. |
| 7. On the forward party of a head of the block of cylinders unscrew nuts and disconnect pipelines from the hydraulic pump of system of the self-leveled back suspension bracket. |
| 8. On models with system кондициониро a vaniye of air take off an auxiliary driving belt and disconnect wires from the compressor of system of a konditsiona of a rovaniye. |
| 9. Remove consolidation from the top part of a partition of a motor compartment, unscrew screws and remove a casing of a plait of wires. |
| 10. On models without turbo-supercharging pick up the air inlet phone, release fixing brackets, uncover the air filter and take the filtering element. |
| 11. On models with a turbocharger pick up the air inlet phone from a turbocharger. |
| 12. Mark and disconnect hoses of supply of cooling liquid and vacuum hoses from the engine. If necessary, release hoses from brackets of fastening or arms on the engine. |
| 13. Mark and disconnect all electric sockets on the engine. Release a plait of wires from brackets of fastening or arms in a motor compartment. Remove a plait of wires from the engine. |
| 14. On models with system кондициониро a vaniye of air take off an auxiliary driving belt. Unscrew the compressor of the air conditioning system from the engine and move it aside, without disconnecting from it hoses. |
| 15. Unscrew nuts and disconnect the giving and returnable fuel-supply lines from the fuel filter or the fuel filter or the fuel pump of high pressure. Close hoses traffic jams. |
| 16. Disconnect an accelerator cable from draft of a butterfly valve. |
| 17. Unscrew a cover from a tank of the amplifier of steering and, using the syringe, pump out the maximum quantity of liquid, then establish a cover into place. |
| 18. Unscrew connecting nuts and disconnect pipelines from the pump of the amplifier of steering. Exempt pipelines from clips or arms on the engine. |
| 19. Remove an insert from an arch of a forward left wheel, then unscrew nuts and disconnect oil pipelines from the oil heater. |
| 20. From a flywheel unscrew the RPM meter of a bent shaft and take electric wires from fastening brackets. Fix the sensor with wires in a motor compartment so that when carrying out further works not to damage it. |
| 21. On models with the automatic transmission unscrew pipes of transmission liquid from the heat exchanger. |
| 22. Remove a vacuum hose of the vacuum amplifier of brakes from the vacuum pump. |
| 23. Hook on the engine slings грузоподъ the pit mechanism and raise so that the weight of the engine was perceived by the load-lifting mechanism. |
| 24. Establish the steel or cardboard sheet between a back part of a head of the block of cylinders and a partition of a motor compartment to exclude damage when raising the engine. |
| 25. In conclusion check that all hoses, pipes and electric sockets are disconnected from the engine. |
| 26. Working under the car, from two parties of the engine unscrew the lower bolts of fastening of support of the power unit. |
| 27. Being careful, take the engine from a motor compartment. At extraction of the engine, if necessary, incline and turn it so that it did not damage a motor compartment. |