10.13.4. Valve of cold start of the engine

Removal

Arrangement of the valve of cold start of the engine

PERFORMANCE ORDER
1. Take off pressure in fuel system.
2. Remove a weight wire from the accumulator.
3. Disconnect the electric socket from the valve of cold start of the engine located on an inlet collector near a head of the block of cylinders.
4. Unscrew connecting nuts of a fuel-supply line, then disconnect a fuel-supply line from the valve of cold start of the engine and the distributor of fuel.
5. Unscrew two screws and remove the valve of start of the cold engine together with laying.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.