| 1. Remove a weight wire from the accumulator. |
| 2. Unscrew screws and uncover the hydraulic device. |
| 3. Dress a pure transparent hose on the union of pumping of the hydraulic device (SP tag) and establish the second end of a hose in a vessel. Unscrew the union of pumping and merge brake fluid in a vessel. |
| 4. For reduction of losses of brake fluid press the hose connecting the pump to a popolnitelny tank of the main brake cylinder. |
| 5. Wipe area about the place of connection of a hose of the pump and connections of tubes. Unscrew connecting nuts and, being careful, take tubes from the pump. Also disconnect a hose from the pump. Close the ends of tubes and a hose traffic jams. |
| 6. Disconnect the electric socket from the pump, then remove the pump from an arm and take from a motor compartment. |